Product Texts
Vydyne 22HSP NT is a general-purpose, unfilled, lubricated, heat stabilized PA66 resin. Designed principally for injection-molding fabrication, this product offers a combination of engineering properties characterized by high strength; rigidity; good toughness; high melt point; good surface lubricity; abrasion resistance; and resistance to many chemicals, machine and motor oils, solvents and gasoline. This product is designed to resist thermal degradation when exposed to warm climates.
General
Additive
Heat Stabilizer, Lubricant
Features
Abrasion Resistance, Chemical Resistant, Fast Molding Cycle, Gasoline Resistant, General Purpose, Good Mold Release, Good Toughness, Heat Stabilized, High Rigidity, High Strength, Lubricated, Oil Resistant, Solvent Resistant
Agency Rating
ASTM, D4066 PA0121, ASTM, D6779 PA0121, SAE, J1639 PA0121 Z6, NSF, STD-51, MIL, M-20693B, FED, L-P-410A, FDA, 21 CFR 177.1500
Automotive Specifications
HMG MS941-03 Type A-1 FRV2, VW VW 50180 (compliance), Toyota TSM5516G, Class 2, Rev 9 (compliance), Stellantis MS-DB-41 CPN 4814, Stellantis MS-DB-41 CPN 3490, Stellantis MS-DB-41 CPN 1076, Renault UB15b, Mercedes-Benz DBL1232 (compliance), Mercedes-Benz DBL1224 (compliance), GM GMW16036P-PA66, Denso MSR-18-019, Aptiv M5507, Aisin TO20141124 - P-PA66-N-808, VW VW 96043 (compliance)
UL File Number
E70062
Appearance
Natural Color
Forms
Pellets
Processing Method
Injection Molding
Physical
dry
cond.
Unit
Test Norm
Density
1.14
-
g/cm³
ISO 1183
Molding Shrinkage
ISO 294-4
Across Flow : 23°C, 2.00 mm
1.7
*
%
Flow : 23°C, 2.00 mm
1.6
*
%
Mechanical
dry
cond.
Unit
Test Norm
Tensile Modulus (23°C)
420610
246565
psi
ISO 527-2
Tensile Stress (Yield, 23°C)
12000
7980
psi
ISO 527-2
Tensile Strain (Break, 23°C)
27
77
%
ISO 527-2
Flexural Modulus (23°C)
435000
160000
psi
ISO 178
Flexural Strength (23°C)
13900
4210
psi
ISO 178
Impact
dry
cond.
Unit
Test Norm
Charpy Notched Impact Strength
ISO 179/1eA
+23°C
1.76
4.09
ftlb/in²
-30°C
1.62
1.43
ftlb/in²
-40°C
1.33
1.24
ftlb/in²
Charpy Unnotched Impact Strength
ISO 179/1eU
+23°C
N
N
ftlb/in²
-30°C
N
N
ftlb/in²
-40°C
N
N
ftlb/in²
Notched Izod Impact Strength
ISO 180/1A
+23°C
1.95
2.81
ftlb/in²
-30°C
1.71
2.09
ftlb/in²
-40°C
1.95
2
ftlb/in²
Thermal
dry
cond.
Unit
Test Norm
Heat Deflection Temperature
ISO 75-2/A
1.80 MPa, Unannealed
153
172
°F
0.45 MPa, Unannealed
354
360
°F
Melting Temperature
500
*
°F
ISO 11357-3
RTI Elec
UL 746
0.710 mm
284
°F
1.50 mm
284
°F
3.00 mm
284
°F
RTI Imp
UL 746
0.710 mm
203
°F
1.50mm
230
°F
3.00 mm
230
°F
RTI Str
UL 746
0.710 mm
239
°F
1.50 mm
257
°F
3.00 mm
257
°F
Electrical
dry
cond.
Unit
Test Norm
Dielectric Strength (1.00 mm)
737
-
kV/in
IEC 60243
Arc Resistance (3.00 mm)
6
ASTM D 495
Comparative Tracking Index (3.00 mm)
400 - 599
V
IEC 60112
High Amp Arc Ignition (HAI)
UL 746
0.710 mm
PLC 0
1.50 mm
PLC 0
3.00 mm
PLC 0
High Voltage Arc Tracking Rate (HVTR), 3.00 mm
PLC 0
UL 746
Hot-wire Ignition (HWI)
UL 746
0.710 mm
PLC 4
1.50 mm
PLC 4
3.00 mm
PLC 4
Flammability
dry
cond.
Unit
Test Norm
Burning Rate, 2.00 mm
0
in/min
ISO 3795
Flammability
UL 94
0.710 mm
V-2
1.50 mm
V-2
3.00 mm
V-2
Glow Wire Flammability Index
IEC 60695-2-12
0.710 mm
1520
°F
1.50 mm
1520
°F
3.00 mm
1760
°F
Glow Wire Ignition Temperature
IEC 60695-2-13
0.710 mm
1290
°F
1.50 mm
1290
°F
3.00 mm
1290
°F
Oxygen index
24
*
%
EN ISO 4589-2
Injection
Value
Unit
Drying Temperature
≤158
°F
Drying Time
1 - 3
h
Rear Temperature
500 - 536
°F
Middle Temperature
518 - 545
°F
Front Temperature
536 - 554
°F
Nozzle temperature
536 - 572
°F
Processing (Melt) Temperature
545 - 572
°F
Mold Temperature
149 - 203
°F
Applications
Cable Glands
Connectors
Body Stiffeners and Crash Inserts
Interiors
