Product Texts
Vydyne 22HSPCN BK0815 is a general-purpose, unfilled, lubricated, heat stabilized PA66 resin. Designed principally for injection-molding fabrication, this product offers a combination of engineering properties characterized by high strength; rigidity; good toughness; high melt point; good surface lubricity; abrasion resistance; and resistance to many chemicals, machine and motor oils, solvents and gasoline. This product is designed to resist thermal degradation when exposed to warm climates.
General
Additive
Heat Stabilizer, Lubricant
Features
Abrasion Resistance, Chemical Resistant, Fast Molding Cycle, Gasoline Resistant, General Purpose, Good Mold Release, Good Toughness, Heat Stabilized, High Rigidity, High Strength, Lubricated, Oil Resistant, Solvent Resistant
Appearance
Black
Forms
Pellets
Processing Method
Injection Molding
Physical
dry
cond.
Unit
Test Norm
Density
1.14
-
g/cm³
ISO 1183
Mechanical
dry
cond.
Unit
Test Norm
Tensile Modulus (23°C)
449618
232061
psi
ISO 527-2
Tensile Stress (Yield, 23°C)
12900
8270
psi
ISO 527-2
Tensile Stress (Break, 23°C)
11700
6960
psi
ISO 527-2
Tensile Strain (Yield, 23°C)
4.8
20
%
ISO 527-2
Tensile Strain (Break, 23°C)
25
76
%
ISO 527-2
Flexural Modulus (23°C)
464000
160000
psi
ISO 178
Flexural Strength (23°C)
14800
4210
psi
ISO 178
Impact
dry
cond.
Unit
Test Norm
Charpy Notched Impact Strength
ISO 179/1eA
+23°C
1.95
5.23
ftlb/in²
-30°C
1.33
1.28
ftlb/in²
-40°C
1.57
1.33
ftlb/in²
Charpy Unnotched Impact Strength
ISO 179/1eU
+23°C
N
N
ftlb/in²
-30°C
N
N
ftlb/in²
-40°C
N
N
ftlb/in²
Notched Izod Impact Strength
ISO 180/1A
+23°C
1.95
4
ftlb/in²
-30°C
1.95
2.38
ftlb/in²
-40°C
1.86
2.24
ftlb/in²
Thermal
dry
cond.
Unit
Test Norm
Heat Deflection Temperature
ISO 75-2/A
1.80 MPa, Unannealed
158
181
°F
0.45 MPa, Unannealed
406
383
°F
Melting Temperature
500
*
°F
ISO 11357-3
Electrical
dry
cond.
Unit
Test Norm
Dielectric Strength (1.00 mm)
737
-
kV/in
IEC 60243
Flammability
dry
cond.
Unit
Test Norm
Burning Rate, 2.00 mm
0
in/min
ISO 3795
Oxygen index
24
*
%
EN ISO 4589-2
Injection
Value
Unit
Drying Temperature
≤158
°F
Drying Time
1 - 3
h
Rear Temperature
500 - 536
°F
Middle Temperature
518 - 545
°F
Front Temperature
536 - 554
°F
Nozzle temperature
536 - 572
°F
Processing (Melt) Temperature
545 - 572
°F
Mold Temperature
149 - 203
°F